Month: November 2023

We have a departure date – Sunday, Dec. 3! The weather has continued to be cold and rainy but we are getting jobs done and the exterior deck is almost completely painted. We sure picked a cold rainy year to paint the deck!!

The days all start to blur together after awhile. We get up around 7:30, have a nice breakfast and wait for it to get warmer outside. Usually Mark does an inside job in the morning while the deck is drying. In the afternoon we paint! Not too exciting. Occasionally we need to go out to buy supplies and groceries and we try to do this when the weather is really bad.

The big job of removing the old anchor chain went very smoothly. Our main anchor was lowered into the water with 2 rope lines and then we used the windlass to transfer the old rusty chain from the locker to the pier. After the chain was removed, we then pulled out the rope anchor line and put it on the pier with the old and new chain. The chain locker needed to be completely empty so Mark could make the necessary changes.

Mark finished the renovation of the chain locker on Monday (Nov. 27). There was a partition in the locker dividing it in half but our new 200ft of chain wouldn’t fit so Mark rearranged the partition. Late in the afternoon we loaded the new chain into the locker – it was a perfect redesign!! After the chain was loaded aboard, we had to bring our 80lb anchor back into position on the bow. We used the windlass to haul the anchor back into position and as it got close to the roller at the bow, the rope broke!! Luckily Mark was holding the second line and as he struggled to hold onto this line, I quickly grabbed the end of that rope. The anchor dropped back into the water and gave Mark a nasty rope burn (removing some skin too). We tied off the line and caught our breath. One of our dock neighbours came over and helped Mark lift the anchor close enough to the bow so I could attached a bigger rope to the anchor. With the new line we were able to get the anchor back on deck and then secured to the chain!!

Today (Nov. 29) will be the second last day for painting (until we return after Christmas). It’s sunny and cool so we’ll wait till after lunch to put the first coat of colour down. We also need to go out and buy groceries for our week long journey down to Vero Beach. We’ll take our time going south!!

Our painting job is running into some challenges now that we are nearing the end of November. The northern Florida weather has turned rainy and cool, making it difficult to complete the 3 coats of paint on the remaining deck areas. We have one more cost to do on the lower side decks so hopefully we’ll have good weather on the weekend to complete that coat. We still have a few outside areas to paint – the lower side deck on the starboard side which we use to board the boat, plus areas close to the enclosure. At this point, we may just concentrate on finishing the outside deck areas and leave the cockpit for another time.

The good part of the cooler weather is that we are getting all the urgent ‘must be done before we can leave’ jobs completed. Mark has been working on all the maintenance items for the engine. He’s changed the oil and filter and he will be replacing hoses soon. The cockpit binnacle has also been reassembled. Over the summer Mark built a new wooden holder for the autopilot controller and the bow thruster controller. The holder with the instruments had to be installed and tested. We’ve also spent a good deal of time cleaning! It’s the perfect opportunity to thoroughly clean while everything is taken apart. The boat is looking pretty good!

Yesterday, Nov. 23, was American Thanksgiving and I cooked a great feast for the two of us. We had the usual thanksgiving meal – turkey, stuffing, mashed potatoes, peas – and a new addition of roasted carrots and butternut squash. It’s always fun making a big meal in our little galley!! It’s amazing how you can make it work!

The only urgent job remaining (besides painting) is getting our new anchor chain onboard – that’s our job for today (Nov. 24th). The old chain needs to be carefully removed – we don’t want to mess up our newly painted bow! We are replacing our current 150ft of chain because it is old and quite rusty (we don’t want to trust our safety to a questionable chain). The challenge we have is with the chain locker. We’ve bought 200ft of chain and we’re not sure how well that will fit into our locker. Mark may need to do a bit of a locker renovation to get all that chain to fit well!! There’s also 150ft of rope in the locker that is attached to the other anchor on the bow – it might be a bit cramped up there!! We’ll find out soon enough!!

It’s been a busy weekend on Crimson Kathryn and on the docks. Saturday saw the departure of our friends Julian and Brad on Alizarin. They left the floating docks around 9am on what turned out to be a lovely (not raining) day. 2 hours later, our other friends on the floating docks, Jane and Steve on Daydreams II, threw off their lines and headed out. It was tough to see them go but they were both heading to St. Augustine so we knew we’d see them soon.

We had a very busy work day on Saturday. As I mentioned previously, we’ve been having this ongoing leak on the port side and Mark asked Ralph Miller (surveyor and fix it guy) to come take a look. Ralph suggested that our dorade boxes (dorades are basically wind scoops – the scoop is on deck and there’s a vent that lets air into the boat) were mounted poorly and could be causing our leak. He was also shocked to see the rather small 1” hole air vent in our cabin. So Ralph and Mark worked on making the dorade boxes less leaky and making the vent hole 4”. There was lots of hole-making (not really what you want to see on your freshly painted deck) and epoxy work going on and after 5 hours, we had 3 repaired dorade boxes and enlarged vents.

It was the first sunny day we’d had since Monday, Nov. 13 so we didn’t want to waste a good deck painting day. Ralph left around 3pm and we started right away putting down the first coat of colour (2nd coat of paint) on the forward upper deck and the port aft deck. It was getting dark and damp as we finished a couple of hours later, but it was great to finally get another coat down!

Sunday (Nov. 19) was another beautiful day and we attacked our jobs with earnest! I finished the last 2 coats of yellow paint on the anchor chain. This paint marks every 25ft so we know how much chain has been let out. Mark worked on installing the new charge regulator for the engine’s alternator. The last regulator broke in the Bahamas last season. After lunch we put the last coat of colour on the 2 deck areas plus the binnacle in the cockpit.

Alizarin and Daydreams had arrived in St. Augustine Sunday afternoon so we made a plan to all meet up for dinner. St. Augustine does a Christmas lights thing every year and many people travel to the downtown area to see the lights. This weekend was the first official weekend of the lights and it was packed!! It took us an 1.5 to get seated for dinner and it took a very long time to get our food. But our server was awesome – she brought us lots of bread and crab soup (free of charge), plus because we waited so long, they gave us 2 free desserts. Even though our whole dinner evening was about 4 hours – we had a great time visiting and relaxing.

So here we are – the start of a new work week. It Monday, Nov. 20 and we have about 2 more weeks to complete all the must be done jobs before we head south to Vero Beach. Time to get working!!

(Just a reminder – the smaller photos are in gallery mode. If you click on the first photo they will enlarge and you can scroll through all the photos that are in the “gallery”. This post has 2 gallery sets – the vent holes and the Christmas lights in St. Augustine. Enjoy)

The rain just won’t stop so we’ve been sticking close to the boat and have shifted to inside jobs. Mark has been picking away at these jobs with the occasional help from me. We’re now on day 3 and the jobs just keep coming!

Most of the inside jobs require the floor boards to come up and the ladder to be removed. Mark started working on the thru hull on Tuesday. Before we were launched Mark had drilled the hole and installed the thru hull and valve. What remained was to install the new hose and run it from the engine water intake to the thru hull. A new strainer was also installed to filter particles out of the incoming water. Installing the hose was a struggle. The hose had to be fed from the engine compartment under the floor to the galley. It’s very cramped under the floor and the hose kept curling up and getting stuck. After a bit of pushing and pulling, we managed to get the hose in place. The connection went very smoothly after that and by the end of the day, the new water intake for the engine was working well.

Other jobs that have been completed include regular maintenance on the engine and the installation of a new light over the galley sink. The old light was falling apart so Mark made a new wood support for the LED lights we bought. It looks so nice! No more red tape (see photo)!!

With all this inside time we’ve been doing a bit of cooking. I made a tasty chilli made with ground chicken. And today (Thursday) Mark made brownies with walnuts, cranberries and dark chocolate chips. With the cooler temperatures, we don’t mind heating up the cabin with the oven.

The week is quickly coming to an end. Tomorrow (Friday) is supposed to be a nicer day so here’s hoping we can get back to painting the deck! Only a few more weeks left before we will be heading south to Vero Beach.

This past weekend brought the cool north wind into Green Cove Springs, just when we needed the warmer temp for painting. The weather has definitely slowed our progress on the painting job but it hasn’t stopped us completely.

Saturday we spent the morning prepping the forward deck and the starboard side (right side) aft deck for painting. Prep includes washing with Pinesol and then a second wash with a cleaner called “tsp” which is a degreaser. Once the deck has thoroughly dried, we tape all the areas that need protection from the paint. The taping is a very tedious job but also super important. You don’t want to rush the taping or you’ll not be happy with the end result!

On Saturday afternoon Ralph Miller stopped by to give us some advice. We first met Ralph about 2 years ago when we needed a new survey of our boat done for insurance purposes. Ralph did an awesome job with the survey and also gave Mark some pointers on items that should be repaired or replaced. Since this survey, Mark has asked Ralph for recommendations and other help. This time Ralph was helping us with a leak we have on the port (left) side. This leak has troubled us for a few years now and we just can’t pin down the source. We see the end result of this leak with water in our galley. It took about 1.5 hours for Mark and Ralph to look over the possible leak sites and now Mark has some strategies for dealing with it.

We were lucky enough to end our Saturday with a happy hour on Jane and Steve’s boat, Daydreams II. Julia and Brad also joined us and we had a lovely evening chatting and eating some yummy food.

We woke on Sunday to a cold, damp day. It was overcast and not warm enough to paint so Mark moved on to a few other jobs. He worked a bit on the windlass (the device at the bow that lowers and hoists the anchor) and made a plan for the chain locker. He also got the binnacle (the structure in the cockpit that holds instruments and the wheel) all ready for painting. I spent the day helping Mark with the binnacle but mostly I worked on a crochet project!

Today (Monday) the weather warmed up enough in the morning for us to get the first coat of primer down! It’s so great to see even more of the boat covered. It looks brand new!! It took a couple of hours to do all the areas this morning, including the binnacle in the cockpit. Once we were done, we drove into St. Augustine for lunch and to do a bit of shopping for boat items! There’s always a list of parts and products needed for all these jobs!

It’s been a fast week on the water! You already know about the work we’ve completed and the jobs that are in progress. This will be a quick recap of the last 2 days.

We spent most of Thursday working on painting jobs. I did the second coat of yellow paint marking the footage on the anchor chain. We also did the first coat of colour on the bow and stern. I thought the off white we choice would be quite different from the white primer but it didn’t really work out that way. The deck does look great so we’re very happy with the colour!

Today (Friday) was very busy on the pier. First thing (around 8:30am) a good sized pleasure boat (old style motorboat) came onto the pier just in front of us. Mark was already on the pier waiting for the air conditioning repair man to show up, so he helped this boat with their lines. Their docking was interesting – they basically used the wooden platforms against the pier as a fender. It wasn’t the best idea. They came in hard, slightly damaging their hull and the wooden platform. Not a great way to start the day!

We’ve been having issues with the air conditioning on our boat since last year so we finally managed to find someone to take a look at it. The guy arrived around 8:30am and his first assessment is that we need a new compressor. He will try to hunt one down for us – our system is quite old so hopefully he’ll have some luck.

The big painting job moved forward today – we got the final coat (of 3) down on 2 areas – the bow and the port side aft deck. It looks amazing and I can’t wait to see the entire deck freshly painted! Crimson Kathryn will look like a brand new sailboat!!

The jobs are being tackled and crossed off the list and each day brings additions to the list. Our early season boat life is all about getting things done. Those lists which you need but hate, have a life of their own! After a while I have a hard time remembering what we did each day so I’ll just summarize it all the best I can!

Tuesday was a job day in the morning only. Mark worked on the first process of our deck painting – a good washing. After that he retrieved our sun shade cover from our storage spot and also brought back the sawhorses and plywood to give us a nice table for the rest of our jobs. I finished the Semco treatment on the hand rails and the winch bases.

We had a lovely treat for lunch on Tuesday. We went to Woodpeckers (a very popular BBQ place close to us) with all our cruising friends at Reynolds! We had lunch with – Julia/Brad (Alizarin), Jane/Steve (Daydreams), Barb/John (Mojo) and Jackie/Tom (Soaring Eagles). The food was awesome – brisket, ribs, turkey, etc are just some of the meats available. This place is super popular with the working folks and it was very busy when we arrived at 12:30pm. It was so nice to relax with friends and have a great meal.

After we enjoyed our lunch with friends, we did a bit of shopping. Home Depot was one of our stops and we got all the necessary supplies for the deck painting. We also went to Costco to see what they had but mostly to buy a 1.75 litre bottle of my favourite bourbon – Woodford Reserve. Even with the exchange, this bottle is cheap!! A 750ml bottle of this bourbon in Canada is $54. This super-sized bottle was only $86 (Canadian)!! Crazy!

The trip back to the marina was very interesting. The BBQ place and all our shopping was on the east side of the St. John River. There is only one bridge close to us and that’s the way we always cross to the east side. This bridge is single lane and very busy during rush hour. We arrived at the left turn to the bridge around 3:30pm and found a huge line of traffic. We decided to drive about 25 miles south to Palatka to cross the river instead of waiting in the traffic. It took us about 1.5 hours to do this detour but it was worth the drive! And we got to see a part of Florida we hadn’t seen before!!

Today (Wednesday) was a very big day – we started the deck painting!! It’s a huge job but boy will it make our boat look amazing!! It took most of the morning to prep for painting the primer. While Mark washed the aft deck (on the port – left side), I painted our new anchor chain to mark the footage in 25ft increments. As the aft deck was drying, we taped the bow. After lunch we did the primer on the bow and the aft port side deck. It already looks amazing!!! It will take 2 days to do the 2 coats of colour. We’ve decided to break the deck up into zones so we can still move around. As the deck is drying, we can work on all the interior jobs!!

Today we ended our day with a fantastic happy hour with Jane and Steve and Julia and Brad! What a great way to end the day!!

There’s a certain pattern and rhythm to being tied up at the Reynolds pier. The days kind of blend together in an endless list of jobs and shopping for those jobs. It takes a few days to get your boat legs – lots of up and down ladders and climbing into small spaces. Your body slowly adjusts to “boat yoga” as Mark calls it!

We’ve now spent our first weekend on the water and it has been very productive. We had an initial list of jobs that made the boat more livable- that’s important when you’re in a small space. To start it all off, we decided to relax on Saturday . All we did was some grocery shopping and then we had a wonderful happy hour with Julia and Brad on Alizarin.

Sunday rolled around – an hour earlier, so we started on the many “make the boat more livable” jobs. First up the sails were removed from inside and I finished cleaning the area blocked by the sails and the forehead head. These jobs were quickly completed – always nice to have fast jobs at the beginning so you can cross them off the list (very satisfying).

The next job was to reassemble the 2 salon chairs. At the end of last season, the internal wood frame of both chairs broke. At home over the summer, Mark took the chairs apart, rebuilt the wood frame and then reupholstered the chairs. They look amazing!! The wooden legs were left onboard so a few holes needed to be drilled to reconnect the legs. Unfortunately the new wooden dowels didn’t line up with the old holes in the chair legs. As Mark tried to coax the leg into place (with a hammer) the strain became too much and the leg cracked in two! Another job to add to the list!! A little epoxy fixed things up in no time!

With that job temporarily on hold, Mark turned his attention to the hot water tank. For some reason it kept tripping the gfi circuit and we had no hot water. To access the tank, the main cabin ladder has to move and the large floor board between the galley and the nav. station has to be lifted out of place. Fortunately this was a very easy repair – Mark had removed the hoses to drain the tank last spring but had forgotten to replace them so we had no water in the tank! The only minor issue was that as Mark was replacing the hoses he dropped a screw and had to retrieve it in the bilge. The head first retrieval strategy normally works but not this time. It took both of us to get Mark out of the bilge.

The rest of the day went very smoothly. I did the semco treatment on our exterior teak cap rails. This is a fairly easy outdoor job but it’s hard on the back! Mark installed a couple of new shelves in one of the storage lockers. All in all, it was a good day!

On Monday we had another early start to the day – not liking this time change business. Job one was to go back to reassembling the chairs. This time things went much better and the two chairs were back to normal in about an hour. Next we tackled the sails. We started with the jib, then did the main sail and finished with the mizzen. All sails went on easily but it’s always a memory game trying to remember how the sail covers and lazy jacks go on!!

Our last job for the day was the dinghy. First it needed to be cleaned both on the bottom and flipped over to do the top. It wasn’t too dirty but it still needs to be done. Once it was looking pretty good, we hoisted it off the bow and onto the water. Next the outboard motor was lowered into position on the transom and then the dinghy was secured in the davits and hoisted back out of the water.

Getting all these little jobs done is great. We’re getting closer to the big deck painting job! That will be a process!!

Friday was an awesome day – Crimson Kathryn was splashed (and had no leaks!). We checked out of our Airbnb a little later than planned but still made it to the boatyard before 9am. By that time, Holland Marine had already launched one sailboat and were in the process of splashing a power boat.

Mark went right to work waxing the last part of the hull. We were fortunate to find 2 sawhorses and a piece of plywood that worked perfectly as scaffolding for the waxing job. Mark was able to reach all but the top part of the bow and for that he used a ladder.

As the waxing was being completed, I checked the pier to see what space was available. After chatting with the Reynolds’ office, we were assigned spot 20 – the same spot we were in last spring! It’s a good spot for us because it’s almost at the end of the pier. There’s very little car traffic at that end which is good because we need to clear everything off of our deck and put it on the pier. Our big job this season is repainting the deck!!

All the waxing was done just in time for the travel lift to arrive around 10:30am. The Holland crew are experts at launching boats. They took their time getting the slings in the correct place on our hull and they wrapped the slings with white paper to keep the hull clean (a very nice thing to do especially after all that waxing!!). It took about 45 minutes to pick Crimson Kathryn up, move her to the travel lift well and then slowly lower her onto the water. They stop lowering the boat when it’s just in the water so the Captain can check for leaks. The new thru hull was perfect – absolutely no leaks aboard this floating home!!

Once we were securely tied to the Holland dock, we had lunch and discussed whether we should move to our spot on the pier. As I mentioned before, we are launched stern first which means we have to back out of the haulout area. Friday’s weather was wet and windy! The wind was blowing straight at our stern – making it a challenge for us to get out! Our decision was made for us – another 42ft sailboat was being launched and we were in the way! With the help of Julia and Brad (who handled our dock lines), Mark backed us out away from the dock and between 2 tied up boats like the pro he is!! We slowly made our way around the end of the pier and came into our spot perfectly. Julia and Brad were there to take our lines and we were all secured before it started to rain!

Now we’re on the pier and the rest of the work gets started! As always there’s a list but hopefully it’s not as long as previous seasons. The big job is the deck painting but I’m sure there will be other smaller things to do that will fill our days!!

Day 4 is done and we’re relaxing back at the condo for our last night. We’ll be splashed in the morning (Friday, November 3) and by this time tomorrow night, we’ll be relaxing on Crimson Kathryn. It’s definitely been a busy few days but all the pre-launch jobs went well.

On Wednesday our weather changed, following the cold front you were experiencing. The temperature wasn’t too bad but the north wind made working outside a bit chilly. Even with the cool wind, it was a successful day with lots of jobs being completed. Mark finished the thru hull installation. He still has plumbing and other things to do for this job but we can go in the water on Friday and not be flooded (always a good thing). Mark also got the new hull zinc installed, touched up the bottom paint in spots and started waxing the hull.

I spent the day cleaning and organizing the interior of the boat. We vacuum seal any item that might be damaged over the hot summer months in Florida. Things like fabric items (sheets, towels etc), electronics and even kitchen items (like the coffee pot and kettle) get sealed away for protection. I emptied all these bags and stowed everything away. I spent a fair bit of time making sure the aft cabin was all ready for us to sleep in on Friday. The only areas left to clean are the forward head and a few spots I can’t reach because of the sails.

Thursday was another cool, windy day – always fun when working outside. I had a pretty low key day. I did some laundry first thing in the morning. I also got our new dock lines from the car and put all the dock lines in place for tomorrow. Mark did one more paint touch up on the bottom and completed about 80% of the waxing. It’s hard work waxing the boat by hand so by 2pm, Mark was too tired to continue. Instead, we did other pre-launch jobs. Mark re-installed the switch for the bow thruster (which we will definitely need to get onto the pier tomorrow) and we moved our forestay back out of the way so the travel lift can pick us up. Most boats are lifted with the bow out but because we are a ketch, the mizzen mast gets in the way of a balanced lift. We get lifted stern out – the main mast gets very close to the travel lift frame to balance the boat in the slings.

In the morning (Friday), we’ll check out of our Airbnb and drive to the boat around 8am. We still have that little bit of waxing to do but that shouldn’t take too long. We probably have a bit of cleaning up to do as well. Our sun shade needs to be folded and wrapped in a tarp. We have some wood that needs to be stored somewhere. But for the most part, we’re ready to get back on the water!!!